Type D2 and J3 Airlift Recovery SystemsThe broad surface area of MFC Survival's Airlift cushion recovery systems ensure its suitability for exerting uniformly distributed lift pressure. This enables its use against accepted weak parts of vehicles e.g. sides, roof, wings, bonnet and boot. The air lifting bags can also be used for light aircraft recovery and the rescue of animals bogged down in pits or ponds. The height of lift enhances access possibilities for medical attention or extrication after ensuring chocks are in position. 
The ‘D’ and ‘J’ Series cushions embody rugged construction, featuring: - 5mm thick 3 ply working surfaces.
- Side walls of heavy duty neoprene coated nylon, external and internal reinforcing bands channel the lift
vertically. - Internal restraint webs provide stability, under load or freestanding.
- Two rings fitted to both top and bottom working surfaces for securing.
- Delivery Hose complete with couplers.
Optional equipment
(both 0.5 and 1.0 bar) Ratchet Tensioner
5,500kgs rating, 500mm web.
1400kgs breaking strain. 4 way control unit
Stainless steel body, brass control valve and valve seats.
Supplied with rapid deflate attachment and replacement seals. Compressor Type D32
Petrol driven. 1000 litre per minute at 2 bar (30psi) nominal.
Safety overload device set at 0.5bar (7psi) Low pressure hose
25mm I/D 3 ply construction.
SWP 6.2 bar (90psi). Available in 3m, 6m, 12m and 18m lengths. Carrying valise
Tough PVC coated nylon.
50mm nylon webbing handles.
Toggle fastening. <<Return to the Emergency Services Product Page <<Return to the Military Services Product Page 
|
